10
10
11
11
11
11
In the same manner as above, search for the
device code for other devices. Remember
to press the correct button for the desired
device in steps and above.
Important!
If the circuit breaker function on your device
is not controlled by infrared lights, you follow
steps through 6 above and start the search.
Then, follow the instructions below.
- Press alternately on the button ON/OFF
and another important function button
until your device reacts with the desired
function. Press the button for the device
you have chosen in the steps above (in
this example the
[ TV ]
button) to store
the search code.
For example, you press alternately
on ON/OFF and another important
function button or on ON/OFF and
PLAY ►.
- Every time that you press the button
ON/OFF the remote control skips to
the next code and send out a signal for
turning off the device. If you do not ma-
nage to stop pressing ON/OFF in time
before the device is turned off, you turn
on the device as fast as you can. Before
the indicator (the LED light) is turned
off you press
[ P- ]
to skip backwards.
Repeat step 7 above and store the code.
- If the LED light flashes 6 times after that
you have pressed ON/OFF , you have
reached the library’s last code. Press
on (in this example
[ TV ]
) to restore
the remote control and repeat the above
procedure to search again.
Note
DVD, SAT and other device codes may be
stored on all function buttons except TV and
VCR.
E
N
G
LI
S
H
