14
1
1
1
1
1
If the LED light flashes quickly 6 times during
recording, the memory is full. Return to normal
mode by pressing a button for desired device.
To clear the memory, follow the instruction
“Entering device code”.
The memory holds a total of 6 commands/
functions.
usaGe
Normal usage
Point the remote control towards the device
and press desired button for desired function.
The remote control will sound a low beep
and the LED light flashes when sending to
confirm that the button is pressed.
Pages (Page)
Every device button normally contains
pages of buttons. You simply press the
“page” button furthest down to the right on
the screen to move between the pages.
sHifT
By pressing the SHIFT button on the screen
and then one of the direct buttons you control
the following functions on your TV (if the
function is supported by your TV and you
have the correct device code):
SHIFT
and then
1
for light strength
SHIFT
and then
2
for colour
SHIFT
and then
3
for contrast
Adjust the levels of the above with
[ VOL+ ]
and
[ VOL- ]
[ VOL+ ]
to increase the level.
[ VOL- ]
to decrease the level.
With the
SHIFT
button activated on the
screen you may access other functions as
well depending on device and model. One
has to try it out, however it does not work
on all devices/models.
E
N
G
LI
S
H
