18
1
19
1
19
1
Problem: The indicator (green LED light)
indicates error (six quick
flashes) when I try to copy
button functions from an
original remote control.
Action 1: Make sure that you point the
remote controls towards each other
on a flat surface at a distance of
-8 cm.
Action : Make sure to not be in direct
sunlight or in a strong light when
you copy button functions.
Action : Clean the infrared lens.
Action 4: Check that the batteries are not
low. If the batteries are low, it may
be hard for the remote control to
copy the button presses correctly.
Action : Make sure that the remote controls
lie within the same distance during
the whole copying process.
Problem: Some copied functions are not
working.
Action 1: These functions have not been
copied correctly. Try to
re-programme these functions.
Problem: Some copied functions only
work sometimes.
Action 1: Your original remote control may
send double signals.
Go through the procedure under
the headline “Advanced recording
of functions from other remote
controls.”
E
N
G
LI
S
H
