8
9
9
In the same manner, you set the device
codes for other devices as well. Just
remember to press the button for device
type in step above.
Note
If the LED light flashes 6 times while
entering the four digit device code the
programming has been interrupted for one
of the following reasons:
1. No digit has been pressed during an 8
second period.
. An invalid device code has been ente-
red.
. The device code has not been entered
correctly. The device code may only
contain the numbers 0-9.
Programming a new device code for a
chosen device type automatically replaces
the old code.
[ TV ]
– the button can only save TV
codes.
[ VCR ]
– the button can only save VCR
codes.
[ DVD ]
and
[ SAT ]
– the buttons can
save all device codes (including TV and
VCR codes)
Tip!
When you have found the correct device
code we recommend that you write down
the code on the label on the backside of
the remote control.
If no device code works with your device
If you cannot find the correct device code
for your device you can search through all
the remote control’s codes for the respec-
tive device type.
TV
- TVs
VCR
- VCRs
SAT
- Satellite and digital TV receivers
DVD
- DVD players
E
N
G
LI
S
H
