background image

6

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

CONTENTS OF THE KIT

The kit comprises of two soldering devices:

The Soldering Gun (1)

. When the trigger is depressed, a light bulb illuminates 

the tip which quickly heats up to its operating temperature.  The gun is 
intended for heavy duty use, for such work as soldering jewellery or joints on 
models etc. It can also be used for cutting thin plastics.

The Soldering Iron (2)

, heats up once plugged in, and is intended for light or 

precision work on  electronic circuit boards etc. A rest (8)

 

is provided so that 

the iron can be safely located whilst not in use.

A set of accessories is included to aid you when soldering. The set comprises a 
reel of solder (6), a tub of flux (7), a solder sucker (3) a probe tool (9) to help 
remove unwanted solder, a hands free magnifier (4) to aid in holding the work 
whilst soldering, a replacement, flat tip (5) and a soldering iron rest (8).

1

Soldering Gun

6

Solder Reel

2

Soldering Iron

7

Flux

3

Solder Sucker

8

Soldering Iron Rest

4.

Hands Free Magnifier

9

Scraper/Probe Tool

5

Soldering Gun Flat Tip

Summary of Contents for 3400760













Reviews: