background image

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SOLDERING IRON (EARTHED ELECTRICAL APPLIANCE)

If the colours of the wires in the power cable of this product do not correspond 
with the markings on the terminals of your plug, proceed as follows.

• The wire which is coloured 

Blue

 must be connected to the terminal 

which is marked 

N

 or coloured 

Black

.

• The wire which is coloured 

Brown

 must be connected to the terminal 

which is marked 

L

 or coloured 

Red

.

• The wire which is coloured 

Yellow and Green

 must be connected to 

the terminal which is marked 

or  

or 

coloured 

Green

.

We strongly recommend that this machine is connected to the mains supply 
via a Residual Current Device (RCD).

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs 
yourself.

WARNING! THE WIRES IN THE POWER CABLE OF THIS PRODUCT 
ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
Blue = Neutral      Brown = Live     Yellow and Green = Earth

Plug must be BS1363/A approved.

Always fit a 5 Amp fuse.

Ensure that the outer sheath of the cable is firmly held by the clamp

Neutral

(Blue)

Live

(Brown)

Earth

(Green and Yellow)

Summary of Contents for 3400760













Reviews: