Clarion DXZ778RUSB Owner'S Manual Download Page 36

Page: 36 / 51

USB Operations

English

DXZ778RUSB

Connecting a USB memory device

1. Connect the USB memory device to the USB

cable.

Playback will begin from the first file
recorded on the USB memory device.

∗

If the USB memory device is not recognized,
press the [

SRC

] button to switch the source to

the device.

∗

Always insert the USB memory device fully
into the connector. Incomplete connections
may cause the USB memory device not to be
recognized.

∗

Depending on the number of tracks recorded,
some amount of time may be required until all
tracks are read into the unit.

∗

The order in which tracks are recorded may
differ depending on the USB memory device
connected (the actual playback order may not
be the same as that indicated on your
computer’s display).

To listen to tracks on a connected
USB memory device

1. Press the [

SRC

] button to switch the source.

When USB memory device is selected,
playback will begin from the location at which
playback was previously stopped.

∗

When a USB memory device is connected the
USB mode will be displayed.

∗

When a USB memory device is disconnected
and then reconnected, playback will begin
from the beginning of the USB memory
device.

To stop play

1. Press the [

SRC

] button and switch the

function to a source other than the USB
memory.

CAUTION

Do not remove the USB memory device
when the USB mode is selected, since it may
result in loss or damage to data on the USB
memory device.

Always backup and save important data on
your computer.

2. Remove the USB memory device from the

USB cable.

DXZ778RUSB_EN.book 36 ページ２００６年１２月２６日　火曜日　午後２時２５分

Summary of Contents for DXZ778RUSB




















































Search results

Summary of Contents for DXZ778RUSB

Reviews:

Related manuals for DXZ778RUSB

Brands by name

Popular brands

Clarion DXZ778RUSB, Owner'S Manual

Search results

Summary of Contents for DXZ778RUSB

Reviews:

Related manuals for DXZ778RUSB

Brands by name

Popular brands