Basic Operations
English
17
DXZ778RUSB
Adjusting Sound Setting
Mode
●
Setting the preset setting
This function allows you to recall, save or
initialize the sound settings.
If your speaker system is “
3WAY
” or “
2WAY
”,
you can store and recall up to three adjustments
you have made to “
P.EQ ON/OFF
”, “
X-OVER
”,
“
T ALIGNMENT
”, “
SPEAKER GAIN
”.
LOAD
:
To recall the stored sound settings.
SAVE
:
To save the sound settings.
INITIAL
: To initialize the sound settings.
The load and the save can be adjusted as
follows.
2-1. Select “
PRESET
”.
3-1. Press the [
] button.
3-2. Push the [
SEEK PANEL
] leftward or
rightward and select from:
“
LOAD
”
↔
“
SAVE
”
↔
“
INITIAL
”
↔
“
LOAD
”...
3-3. Push the [
P.CH
] button upward or
downward to adjust the load and the save.
LOAD
: “
SELECTING 1
” to “
SELECTING
3
” (The factory default setting is
“
SELECTING 1
”)
SAVE
: “
1
” to “
3
” (The factory default
setting is “
1
”)
3-4. Press and hold the [
] button to
store into memory.
(
LOAD
: Press and hold the button for 1
second or longer.
SAVE
: Press and hold the button for 2
seconds or longer.)
●
Setting the all seat
The setting of “
T ALIGNMENT
” and “
SPEAKER
GAIN
” temporarily returns to the factory default
setting. When the setting that is adjusted for the
driver's seat returns to the factory default
setting, a sound suitable for all seats is
provided.
∗
The factory default setting is “
OFF
”.
2-1. Select “
ALL SEAT
”.
3-1. Push the [
P.CH
] button upward or
downward to select “
ON
” or “
OFF
”.
●
Setting the X-OVER
This function allows you to adjust the speaker
setting such as cutoff frequencies or slope
matched to the speakers you are using.
(Crossover).
2-1. Select “X-OVER”.
3-1. Press the [
] button.
3-2. Push the [SEEK PANEL] leftward or
rightward and select from:
To change sound setting mode
1. Press and hold the [
] button for 2
seconds or longer and select the sound
setting mode to adjust.
2. Push the [SEEK PANEL] leftward or
rightward to select the “item name”.
When speaker system is “NORMAL”:
“PRESET”
↔
“ALL SEAT”
↔
“T
ALIGNMENT”
↔
“P.EQ ON/OFF”
↔
“EQ
SELECT”
↔
“SUB WOOFER”
↔
“PRESET”...
When speaker system is “3WAY”:
“PRESET”
↔
“ALL SEAT”
↔
“X-OVER”
↔
“T ALIGNMENT”
↔
“SPEAKER GAIN”
↔
“P.EQ ON/OFF”
↔
“EQ SELECT”
↔
“SUB WOOFER”
↔
“PRESET”...
When speaker system is “2WAY”:
“PRESET”
↔
“ALL SEAT”
↔
“X-OVER”
↔
“T ALIGNMENT”
↔
“SPEAKER GAIN”
↔
“P.EQ ON/OFF”
↔
“EQ SELECT”
↔
“PRESET”...
∗
In the case of item names appearing with
the “ENT” suffix, after the item name, the
[
]
button must be pressed to display
the setting value.
∗
After completing settings, press the
[
]
button to return to the previous mode.
•
HIGH
• HPF
• HPF SLOPE
• PHASE
•
MID
• LPF
• LPF SLOPE
•
HPF
• HPF SLOPE
• PHASE
•
SUB-W
• LPF
•
LPF SLOPE
•
HPF
• HPF SLOPE
•
PHASE
•
HIGH
3WAY mode
(High pass filter)
(HPF slope)
(Phase)
(Front speaker (high))
(Front speaker (mid))
(Subwoofer)
(Low pass filter)
(LPF slope)
DXZ778RUSB_EN.book 17 ページ ２００６年１２月２６日 火曜日 午後２時２５分
