21
Installing the Drive Eye
3. Connect the Power Cable
1
Connect the power cable into the top of the Drive Eye. Please insert it all
the way until you hear the click.
2
Connect the Red wire (Main Power supply) of the power cable to the
vehicle main power supply (or the back up power supply).
Connect the Orange wire (Accessory power supply) to the vehicle
accessory power.
Connect the Black wire (GND) to the vehicle ground.
The Broun wire is unneeded, so please seal it with tape to prevent from
short out.
Orange wire(Accessory power supply)
Red wire(Main power supply)
Brown wire is unneeded
Black wire(GND)
00DRIVE EYE.book Page 21 Friday, February 8, 2008 3:57 PM
