44
Other Functions
3. The setting screen appears.
You can control the sensitivity slider by dragging it. If you drag it left, the
sensitivity level will be lower, if right, the level will be higher.
NOTE
Car
: You can set the sensitivity for a car to its optimum level with one click.
(Initial settings)
Truck
: You can set the sensitivity for a truck to its optimum level with one
click.
Acceleration /
Deceleration
: Setting the sensitivity level of impacts from forward and reverse.
Mainly, it is for reading impacts from a sudden stop or rapid
acceleration.
Yaw
: Setting the sensitivity level of impacts from left and right. Mainly, it is
for reading impacts from a sudden turning of the wheel.
Pitch
: Setting the sensitivity level of impacts from above and below. Mainly,
it is for reading impacts when a vehicle drives over an object such as
a curbstone.
When you change the settings, drag the sliders a few levels at one time.
Excessive changes may cause recording problems.
00DRIVE EYE.book Page 44 Friday, February 8, 2008 3:57 PM
