17
Installing the Drive Eye
6. Place the Drive Eye on your windshield to check the camera
angle (without removing double-stick tape). It may be easier to
confirm the camera angle if someone can check it from the
outside of your vehicle. The ideal camera angle is slightly
downward as indicated by the arrow in the illustration below.
NOTE
• Change the camera angle only when it is necessary.
• When adjusting the camera angle, handle the Drive Eye and the camera
carefully to avoid damaging.
• After the angle adjustment, we recommend connecting the power cable without
removing double-stick tape, and hold the Drive Eye for test recording. After the
test, check the image with your computer. If the image is properly recorded, fix
the Drive Eye to the windshield by removing double-stick tape. If the camera
angle is not right, it may not record signals properly. (Once the Drive Eye is set
on the windshield, it will be difficult to adjust the camera angle.)
Ideal camera angle = facing slightly downward
00DRIVE EYE.book Page 17 Friday, February 8, 2008 3:57 PM
