Clare Controls CM-MT6610-BT-70, User Manual

Page: 8 / 40

2 HDBaseT 6x6 Matrix Switcher User Guide
Front panel
Figure 1: Front panel
(1) Firmware Micro USB port for updating firmware.
(2) Power indicator Power 'on' indicator light.
(3) IR receiver IR receive window.
(4) LCD indicator Shows real-time system status.
(5) INPUTS Normal mode : The input buttons range from 1 to 6.
Inquire mode : Press and hold SELECT for three seconds to
enter this mode. Press ◄► to change menus and ▲▼ to
change channels.
(6) OUTPUTS Output buttons range from 1 to 6. HDMI INPUT 1 to 3 support
local HDMI output.
(7) FUNCTION GLOBAL : Select all outputs to transfer on input to all outputs.
Example: Transfer both AV and IR signals from input channel 1
to all output channels.
Operation: Press 1 + SELECT .
EDID : Management button. Enable the input port to manually
capture and study the EDID data of output devices.
Example : Input channel 2 captures and studies the EDID data of
output channel 4.
Operation: Press buttons in this order EDID + 2 + 4 + SELECT .
Note: Press button 2 in INPUTS and 4 in OUTPUTS.
CLEAR : Clear an operation, such as switching output channel,
studying EDID data before it comes into effect. Meanwhile, the
switcher returns to the previous state.
SELECT : Confirm operation. Press and hold it for three seconds
to enter the Inquire mode.