Clare Controls CM-MT6610-BT-70, User Manual

Page: 24 / 40

18 HDBaseT 6x6 Matrix Switcher User Guide
Recall[Y]. Recalls the preset command [Y].
Clear[Y]. Clears the preset command [Y].
PWON. Works in normal mode.
PWOFF.
Enters standby mode and stops power to the HDBaseT
receivers.
STANDBY Enters standby mode and keeps power to the HDBaseT
receivers. Press other buttons or send other commands
to start.
Audio/[X]:[Y] Select HDMI audio or analog audio as the audio source
for outputs 1 to 6.
/%[Y]/[X]:[Z]. HDCP management command.
 [Y] is for input (value: I) or output (value: O).
 [X] is the number of one port, if the value of X is ALL,
it means all ports.
 [Z] is for working status (value: 1 or 0).
Y=I and Z=1, the input port is compliant with the HDCP.
Y=O and Z=1, the output port is compliant with the
HDCP.
Y=I and Z=0, the input port is not compliant with the
HDCP.
Y=O and Z=0, the output port is not compliant with the
HDCP.
[x1] R[x2].
Transfers the IR signal from the input channel [x1] to the
output channel [x2].
DigitAudioON[ x]. Enable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, enables one port.
X=7, enables all six ports.
DigitAudioOF F[x]. Disable the HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, disables one port.
X=7, disables all six ports.