Clare Controls CM-MT6610-BT-70, User Manual

Page: 16 / 40

10 HDBaseT 6x6 Matrix Switcher User Guide
Status check
To access the System menu, press SELECT for three seconds. Use the left and right
direction buttons to navigate checking the previous and next item.
Table 3: Examples of front panel operations
Function items
Example Description
Checks the connection
status of inputs
Y: The corresponding port is connected
with the input device.
N: It is not.
Checks the connection
status of outputs
Y: The corresponding port is connected
with output device.
N: It is not.
Correspondence between
inputs and outputs
Shows the correspondence between
the six inputs and six outputs.
Checks if the input is with
HDCP
Y: The input signal is with HDCP.
N: It is not.
Checks if the output is
with HDCP
Y: The output signal is with HDCP.
N: It is not.
Checks the output
resolution
Use ▲▼ to check all six output
resolutions.
Output check
Press any output button to check the corresponding input.
Example: Check which one is the corresponding input to output 2.
Operation: Press output 2 button. The LCD screen display “01B02 01R02”, and the
indicators for input 1 and output 2 turn on for three seconds. Output 2 corresponds
with input 1.
Clear operation
When you switch output channels, study EDID data, or set EDID data, press CLEAR
to clear the operation before you press SELECT to enable it. When pressed, the
switcher returns to the previous status.
1 2 3 4
Y Y Y Y
Out
Connect
Out
Input
1 2 3 4
1 2 3 3
In
HDCP
1 2 3 4
Y Y Y N
Out
HDCP
1 2 3 4
Y Y Y N
Resolution
Out 1
1920X1080