20
HDBaseT 6x6 Matrix Switcher User Guide
UpgradeIntED
ID[x].
Select one type of EDID data and upgrade built-in EDID
data. Supports four types of EDID data:
1. 1080P, 3D, 2CH
2. 1080P, 3D, Multichannel
3. 1080P, 2D, 2CH
4. 1080P, 2D Multichannel
5. 3840 x 2160, 2D (30 Hz)
6 4096 x 2160, 2D (30 Hz)
[x] = 1, 2, 3 or 4
When the switcher receives the command, it displays a
message to send the EDID file (.bin file). Operations are
canceled after ten seconds.
EDID/[x]/[y].
Set the built-in EDID data of the input port [x] to the type
[y]. The value of [y] is 1, 2, 3, and 4. The EDID data types
are the same as mentioned above.
GetIntEDID[x]
Returns the embedded EDID data ranked x, [x]=1 to 6.
GetInPortEDID[X]
Returns the EDID data of input [x], [x]=1 to 6.
%0801.
Automatic HDCP management.
%0900.
Sets as infrared carrier following mode.
%0901.
Sets as infrared carrier enforcing mode.
%0911.
Resets to factory default.
%9951.
Checks the command sent by port 1 when PWON.
%9952.
Checks the command sent by port 2 when PWON.
%9953.
Checks the command sent by port 3 when PWON.
%9954.
Checks the command sent by port 4 when PWON.
%9955.
Checks the command sent by port 5 when PWON.
%9956.
Checks the command sent by port 6 when PWON.
%9941.
Checks the command sent by port 1 when PWOFF.
%9942.
Checks the command sent by port 2 when PWOFF.
%9943.
Checks the command sent by port 3 when PWOFF.
%9944.
Checks the command sent by port 4 when PWOFF.
%9945.
Checks the command sent by port 5 when PWOFF.
%9946.
Checks the command sent by port 6 when PWOFF.
%9961.
Checks the system locking status.
%9962.
Checks the status while in standby mode.
Summary of Contents for CM-MT6610-BT-70
Page 1: ...2015 04 917 Rev 02 HDBaseT 6x6 Matrix Switcher User Guide...
Page 6: ...iv HDBaseT 6x6 Matrix Switcher User Guide...
Page 39: ......
Page 40: ......
