HDBaseT 6x6 Matrix Switcher User Guide
17
IP and RS232 control protocol
Bi-directional RS232 to each connected HDBaseT receiver allows the control of
displays, projectors, etc. at the receiver locations.
Communication protocol
: RS232 communication protocol
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Table 4: RS232 command types and codes
Command
Type
Command Code
Function
System
Command
/*Type;
Returns the switcher model information.
/%Lock;
Locks the front panel buttons on the switcher.
/%Unlock;
Unlocks the front panel buttons on the switcher.
/^Version;
Returns the firmware version installed.
/:MessageOff;
Turn the COM port feedback command off.
/:MessageOn;
Turn the COM port feedback command on.
Demo.
Puts the switcher into 'Demo' mode.
Undo.
Cancels the prior command.
Operation
Command
[x]All.
Transfers the signal from the input channel [x1] to all
output channels.
All#.
Transfer all input signals to their corresponding output
channels.
All$.
Switches off all of the output channels.
All@
Switches on all of the output channels.
[x]#.
Transfers signals from the input channel [x] to the output
channel [
x
].
[x]$.
Switches off the output channel [
x
].
[x]@.
Switches on the output channel [
x
].
[x1] V[x2].
Transfers the video signal from the input channel [
x
1] to
the output channel [
x
2].
[x1] B[x2].
Transfers the AV and IR signals from the input channel
[
x
1] to the output channel [
x
2].
Status(X)
Checks the status of the output channel [
x
].
Status.
Returns the current status of the input channel to the
output channels one by one.
Save[Y].
Saves the present operation to the preset command [Y],
ranges from 0 to 9.
Summary of Contents for CM-MT6610-BT-70
Page 1: ...2015 04 917 Rev 02 HDBaseT 6x6 Matrix Switcher User Guide...
Page 6: ...iv HDBaseT 6x6 Matrix Switcher User Guide...
Page 39: ......
Page 40: ......
