Clare Controls CM-MT6610-BT-70, User Manual

Page: 15 / 40

HDBaseT 6x6 Matrix Switcher User Guide 9
Learn EDID data
Learn EDID data from one input port to one output port.
Example: Enable input 2 to learn EDID data from output 4.
Operation: Press EDID + 2 + 4 + SELECT
All input ports learn EDID data from one output port.
Example: Enable all input ports to learn EDID data from output 4.
Operation:
Press
EDID + 4 + SELECT
and hold for three seconds
Note:
Each button flashes two times when the data is successfully copied, and turns
off. Should the operation fail, each button flashes quickly for three seconds.
EDID setting
Select one type of EDID data from following four types of built-in EDID data:
 INPUT 1: 1080P 3D 2CH
 INPUT 2: 1080P 3D Multichannel
 INPUT 3: 1080P 2D 2CH
 INPUT 4: 1080P 2D Multichannel
 INPUT 5: 3840 x 216 2D (30 HZ)
 INPUT 6: 4096 x 2160 3D (30 HZ)
To set the EDID data of one input port, press EDID and hold for three seconds to
enter in EDID setting statues, and then press O SELECT.
Example: Set the EDID data of INPUT 4 to the forth type of EDID data.
Operation: Press EDID + 4 + 4 + SELECT and hold for three seconds
To set the EDID data of all input ports, press EDID and hold for three seconds to
enter in EDID setting statues, and then press O SELECT.
Example:
Set the EDID data of all input ports to the second type of EDID data.
Operation: Press and hold EDID + 2 + SELECT
Note: Each button will flash for two times when the data copies successfully, and
then turns off. Should the operation fail, each button quickly flashes for three
seconds.