Clare Controls CM-MT6610-BT-70, User Manual

Page: 37 / 40

HDBaseT 6x6 Matrix Switcher User Guide 31
Safety operation guide
To guarantee the reliable operation of the equipment and safety of the staff, please
follow the procedures listed below.
 The system must be grounded properly. Do not use two blade plugs. Ensure the
supply voltage is in the correct range of 100 to 240 V and from 50 to 60 Hz.
 Do not place the device in an area that is abnormally hot or cold or does not
have proper temperature control and ventilation.
 The device generates heat when running. Its environment should be well
ventilated to prevent damage caused by overheating.
 Disconnect power in humid weather, or when left unused for long periods.

Before making or removing any connections to the device, ensure that the power
supply has been disconnected.
 Do not attempt to open the enclosure of the equipment. Do not attempt any
repairs. There are no user-serviceable parts inside. Any attempt to open the
equipment will result in a complete void of warranty and may result in serious
injury or death.
 Do not splash any chemical substances or liquids on or around the equipment.