HDBaseT 6x6 Matrix Switcher User Guide
21
%9963.
Checks the working mode of infrared carrier.
%9964.
Checks the IP address.
%9966
Checks the audio source of all outputs.
%9971.
Checks the connection status of the inputs.
%9972.
Checks the connection status of the outputs.
%9973.
Checks the HDCP status of the inputs.
%9974.
Checks the HDCP status of the outputs.
%9975.
Checks the switching status.
%9976.
Checks the output resolution.
%9977.
Checks the status of digital audio of output channels.
%9978.
Checks the HDCP status of the input ports.
Notes
Disconnects all of the HDBaseT cables before sending the command
EDIDUpgrade[X].
In the above commands, the [ ] symbols are for easier reading and should not
be typed in the actual operation.
Remember to end the commands with the ending symbols “.” and
“;”.
Type the commands carefully. They are case-sensitive.
Control the switcher
To control the switcher, you must connect its 9-pin female RS232 port to the PC’s
RS232 port.
– or –
Connect any one of the HDBaseT receiver’s RS232 ports to the PC.
The RS232 command transmits to the switcher via the twisted pair. Use the RS232
control software to control the switcher.
Summary of Contents for CM-MT6610-BT-70
Page 1: ...2015 04 917 Rev 02 HDBaseT 6x6 Matrix Switcher User Guide...
Page 6: ...iv HDBaseT 6x6 Matrix Switcher User Guide...
Page 39: ......
Page 40: ......
