27
CLAGE
EN
5. Using the Tap
applying a closer tolerance to the set point. The appliance reheats earlier but shorter.
• Fan speed: The fan speed may be adjusted for quieter operation only if the environ-
mental temperatures are considerably lower than 35 °C.
Reset – Deactivation of the password function
‘Service’
A special password specific to the unit is needed in order to access the Service menu.
Please contact Central Customer Service.
‘Password’
A user password can optionally be set to lock the ‘Settings’ menu and prevent
unauthorised persons from altering the settings. The password should be 4 digits long.
‘Radio’
N/A.
‘Settings’
Date/time – set the time and the time format.
Temperature – set the water temperatures.
Filter – enter the filter data in order to calculate the remaining filter capacity.
Energy saving – the unit’s heating function and chilling function can be disabled when
the unit is not in use, to reduce the energy demand. Alternatively, the boiling water
temperature can be reduced during Sleep phases for a shorter warm-up time when the
unit is used again.
• Sleep mode automatically reduces the energy demand according to use or to the
ambient light.
• The time switch reduces the energy demand according to the time set. The date and
time must be correctly set on the unit for this to operate correctly.
Safety – the Safety button can be enabled to prevent boiling water being dispensed
accidentally. At the Classic tap this can be done either on the tap itself (refer to section
‘Child safety lock’) or via the menu. In case of the Arc tap this can only be done in the
menu. For Classic only a scald Protection can also be enabled, for instance to prevent
children from dispensing boiling water.
• To dispense boiling water when the Safety button is enabled:
a. Classic: ...press the red lever and at the same time press the Safety button on the
tap.
b. Arc: ...double-tap the safety button twice before turning the lever.
• To dispense boiling water when Scald Protection is enabled, press the Safety button
three times in succession. All LED´s of the tap flash three times to confirm. Boiling
water can then be dispensed for 30 seconds.
Dispensing time – pull /turn the lever on the tap forward and set the dispensing time.
