25
CLAGE
EN
5. Using the Tap
Note: If the drinking water system has not been used for several days, allow the
tap to run cold water for about five minutes.
Operation
Classic
Press the red lever to dispense boiling water. Pull the lever up to dispense boiling
water continually. The water will flow for 5 to 15 seconds. This time can be set in the
menu. The lever then has to be manually returned to the Off position.
Press the blue lever to dispense cold water. Pull the lever up to dispense cold water
continually. The water will flow for 5 to 15 seconds. This time can be set in the menu.
The lever then has to be manually returned to the Off position.
Arc
Select the desired type of water by tipping to on the Select button on the ZIP lever at
the tap.
• Red: boiling water
• Blue: chilled water
Turn the lever to dispense water. When the lever is turned back, water will flow as
long as the lever is held. If the lever is turned forwards, water will flow continually for
5 to 15 seconds. This time can be set in the menu. The lever then has to be manually
returned to the Off position.
Red light
• On all the time: boiling water is ready and can be dispensed.
• Flashing: the water has not yet been heated to the set temperature.
Blue light
• On all the time: temperature of chilled water is at the set temperature.
• Flashing: the water has not yet been chilled to the set temperature.
White filter LED (Classic)
• Flashing: the filter needs to be replaced. This LED starts flashing according to filter
use and the filter capacity set in the menu.
Note: For the taps Arc and Celsius Arc the need for a filter replacement is indi-
cated by cyclically flashing all the LEDs in all colours
Boiling water lever
Cold water lever
White filter LED
SELECT
SAFETY
Boiling water,
chilled water
Zip lever
