Clack Water Specialist WS1TC, Operation And Instruction Manual

Page: 17 / 48

WS1TC & WS1.25 TC Manual Page 17
STEP 6I7
– Tuesday Regeneration: To regenerate on Tuesday use the UP or DOWN button until
the arrow points to Regen. If the arrow does not point to Regen a regeneration will not occur on
Tuesday. Press SET HOUR to go to STEP 7I7.
STEP 7I7
– Wednesday Regeneration: To regenerate on Wednesday use the UP or DOWN button
until the arrow points to Regen. If the arrow does not point to Regen a regeneration will not occur
on Wednesday. Press SET HOUR to go to STEP 8I7.
STEP 8I7
– Thursday Regeneration: To regenerate on Thursday use the UP or DOWN button
until the arrow points to Regen. If the arrow does not point to Regen a regeneration will not occur
on Thursday. Press SET HOUR to go to STEP 9I7.
STEP 9I7
– Friday Regeneration: To regenerate on Friday use the UP or DOWN button until
the arrow points to Regen. If the arrow does not point to Regen a regeneration will not occur on
Friday. Press SET HOUR to go to STEP 10I7.
STEP 10I7
– Saturday Regeneration: To regenerate on Saturday use the UP or DOWN button
until the arrow points to Regen. If the arrow does not point to Regen a regeneration will not occur
on Saturday. Press SET HOUR to exit Installer Displays & Settings.
NOTE: If all arrows are turned off in d1-d7, Days to Regen in the User Displays will always read
7 and a regeneration will never occur.
User Displays
General Operation
When the system is operating one of two displays will be shown. Pressing UP or DOWN button will
alternate between the displays. One of the displays is always the current time of day (to the nearest
hour). The second display is the days remaining until the next regeneration. If the days remaining
is equal to one, a regeneration will occur at the next preset regeneration time. The user can scroll
between displays as desired.
If the system has called for a regeneration that will occur at the preset time of regeneration, the arrow
will point to Regen.
Regeneration Mode
Typically a system is set to regenerate at a time of low water usage. An example of a time with
low water usage is when a household is asleep. If there is a demand for water when the system is
regenerating, untreated water will be used.
When the system begins to regenerate, the display will change to indicate the cycle of the
regeneration process (see Table 3) that is occurring and an arrow will also point to Regen. The
system will run through the steps automatically and will reset itself to provide treated water when
the regeneration is completed.
STEP 8I7
➟
STEP 9I7
➟
STEP 10I7
STEP 6I7
➟
STEP 7I7
➟
➟
➟
➟
Return to
Normal Mode
or