[SM-385853-A]
−
9
−
●
Analog output continues even if the flow rate range is exceeded.
With the display integrated type, "Hi" or "Lo" will be displayed. With
the display separate type, the bar display will flicker.
Note that this is outside guaranteed precision.
●
When using the display integrated type, do not press down on the
display section. It could break.
●
The accuracy may vary from the initial status depending on the
working environment or working conditions at the customer site. It is
recommended to check the operation of the product periodically.
●
The sensor chip will degrade when used for a long time and cause
the detected flow rate to vary. Periodically inspect the sensor chip.
●
Use conditions for CE compliance
This product is CE-marked, indicating conformity with the EMC
Directives. The standard for the immunity for industrial environments
applied to this product is EN61000-6-2; the following requirements
must be satisfied in order to conform to this standard:
[Conditions]
The evaluation of this product is performed by using a cable pairing a
power supply line and a signal line, evaluating this cable as a signal line.
This product has no resistance against surge immunity. Implement surge
protection measures on the system side.
●
Do not turn the dial forcibly when fully closing or opening it(0.05 N.m
or less). Do not use the lock nut to adjust the needle. Otherwise this
could cause needle galling or damage.
Note of Integrated needle valve type
●
Vibration could cause the needle to turn and the flow rate to change
.
CAUTION:
！
Discontinue
