CKD ERL 2-45, Manual, Page: 62 / 64

Related products
Catalog No. CC-1287A
Electric actuator Motorless
Ball screw drive ETS Series
Motor size: 8 types, lead: 7 types, motor orientation: 5 types
Mount a motor that you are familiar with
Mounting specifications for origin sensor and limit sensor can
also be selected
Stroke length can be selected from 100 to 1500 mm (50 mm
pitch)
Max. load capacity is 150 kg, max. speed is 2000 mm/s for
support of a wide range of applications
Belt drive ETV Series
Belt drive based on the ETS Series.
Stroke lengths of 100 to 3500 mm (50 mm pitch) can be
selected; max. speed 2000 mm/s and long strokes are achieved.
Motor size: 6 types, motor mounting direction: 6 types
Mount a motor that you are familiar with
Ball screw drive low dust specifications
ECS Series
Based on the ETS Series, low dust generation is achieved by a
full cover structure and vacuum port.
Motor size: 7 types, lead: 7 types, motor mounting direction: 5
types
Mount a motor that you are familiar with
Mounting specifications for origin sensor and limit sensor can
also be selected
Stroke length can be selected from 100 to 1500 mm (50 mm
pitch)
Max. load capacity is 150 kg, max. speed is 2000 mm/s for
support of a wide range of applications
Belt drive Low dust generation
ECV Series
Based on the ETV Series, low dust generation is achieved with a
full cover structure and a vacuum port.
Motor size: 6 types, motor mounting direction: 6 types
Mount a motor that you are familiar with
Catalog No. CC-1165A, CC-1216A, CC-1217A, CC-1257A
Electric actuator KBX Series
Short tact times
Maximum of 2000 mm/s (timing belt drive)
High precision
Repeatability: ±0.01 mm (ball screw drive)
All models are absolute types
All models use a long-lasting lithium battery (lifetime of 50,000
hours) and are standard on all models that do not require to return
to origin.
High level processing using a high speed CPU
Achieves high level processing capacity due to the adoption of a
high speed CPU
Extensive variations
Ball screws: 8 types, timing belts: 7 types
Four directions on each shaft can be selected as the motor
mounting position
55