CKD ERL 2-45, Manual, Page: 5 / 64

"E Tools" electric actuator setting software
Note: An RS-485 interface and a separate PC communication cable (page 41) are required to connect the PC and
controller.
Download the "E Tools" electric actuator setting software and the Instruction Manual from the CKD website.
Website address: http://www.ckd.co.jp
Operation instructions
You can perform the following manual operations from E Tools
Jog
Inching
Point movement
Forced output to the general purpose output
You can easily set multiple point data settings.
Monitor
Actuator operational status
Input and output status of the general purpose input and
output
Check the alarm history stored on the controller
Settings
Easy editing and setting of point data and parameters
Main functions
Intro 2