Civemasa Implementos Agrícolas
20
AACRP
Adjustments and operations
Plow leveling
A
A
A
A
Lower
Lower
arm
arm
To level the equipment, proceed as
follows:
Place the tractor on a flat place and level
the equipment on its width (transversal) and
on its length (longitudinal).
Check if the distances between the lower
arms and tires are equal on both sides (as in
"A"). On the width, the leveling is done through
the adjuster of the lower right hydraulic arm,
leaving the equipment drawbar lifted or both
"B" with the same measure.
On the length, the leveling is done
through the upper hydraulic arm (third point),
leaving the frame parallel to the soil.
The equipment is leveled from the front
to the rear by adjusting the upper connection
length of the three-point hitch; Shorten the
upper bar to lean the equipment forward
or lenghten the bar to lean the equipment
backwards.
B
B
B
B
Upper
Upper
hydraulic arm
hydraulic arm
Leveling on the
Leveling on the
length
length
Leveling on the
Leveling on the
width
width
Adjuster
Adjuster
Lower arm
Lower arm
