Civemasa Implementos Agrícolas
19
AACRP
Set-up instructions
Preparing the tractor
The following instructions must be carefully observed in order to get the best working
performance.
NOTE
Quick coupling (hanger type)
A
A
Check the general conditions for using the tractor, especially the good functioning of
the hydraulic system (three-point hitch).
The addition of water ballasts on the tires or a set of weights on the front part/rear
wheels of the tractor are the most used ways to increase the traction over soil and to give
a greater stability to the tractor.
When transporting the plow or lifting it for maneuvers, check the tractor
manual to be sure about the necessary weight to not affect the stability of the
tractor-plow set. Without this proper weight distribution, serious accidents
or even death may occur.
Civemasa is not responsible for the incorrect use of the equipment.
The quick coupling (hanger type) (A) comes equipped to the tractor to facilitate and
give greater security.
With the fast coupling, the operator can perform the plow hitching from the seat.
Choose a place as flat as possible for hitching.
Drive the tractor slowly in reverse gear in order to get closer to the plow and be ready
to brake. After hitching, lift the plow until it clicks lock.
For a perfect coupling, the plow must be centralized with the tractor.
Align the tractor quick coupling with the plow drawbar.
