Civemasa Implementos Agrícolas
22
AACRP
Adjustments and operations
Automatic retrieving and pressure adjustment
NOTE
C
C
A
A
C
C
B
B
The moldboards are protected with an automatic retrieving system through the flat
spring (A) for a greater safety of the equipment and tractor hydraulic system (third point).
Therefore, use only original parts for replacing them.
If the soil is free from obstacles such
as stones, roots and others, the pressure
adjustment bolts (B) must be positioned
facing the flat spring. If the soil has obstacles
that may stuck on the moldboards, the bolts
must be tightened in a way that the necessary
pressure for the retrieving to work is smaller
than the pressure caused by the impact, thus
avoiding the rods rupture.
The bolt (C) must be tightened until there is no clearance between the moldboard
and frame support, allowing that the moldboard articulates freely.
