Citronix ci5200, Technical & Service Manual

Page: 232 / 288

ci5000 Series Printer Technical Service Manual
Version 0.1 7-10
This command provides access to multiple fields:
Current: 00000050 (interim start value)
Upper: 99999999 (enter upper limit value)
Lower: 00000000 (enter lower limit value
Increment: 999 (enter increment value)
Repeat: 001 (enter repeat value)
Print Leading Zeros: Y (enter Yes or No)
Number of Digits: 6
Example string: CO0,0,10000,000,001,Y,6<CR>
MD (Message Data)
This command provides the ability to download data to a pre-existing message selected for printing.
Each data field is entered and separated by a comma. The data is loaded in the order of which the data
fields were created. The comma after the MD and the comma before the <CR> are optional. To use a
comma as data, a TAB character (decimal 9) may be used as the field separator. To use one data field
with a comma as data, a TAB must be used after the MD.
Example string: MD,xxxxxxxx,iiiiiiiiiiiiiii,nnnnnnnnnnn,bbbbbbbbbbbb,<CR>
Explanation:
x = Field 1 Data
i = Field 2 Data
n = Field 3 Data
b = Field 4 Data
*Additional fields can be added by using the “,” as the separator.
ME (Message Command)
This command enables the ability to create a message externally.
ML (Message List)
This command allows the list of messages to be delivered from the ci5000 Series Printer to the host
device.
Example output:
Available Messages:
Date Time Name
11/29/2020 12:16 1
11/29/2020 12:16 2
12/5/2020 12:24 *Test
00/00/0000 0:00 DEFAULT
SH (Shift Set)
This command provides access to the following fields:
Shifts: 2 (enter value 1, 2 or 3 dependent on time values to use)
Shift 1: HH MM SS (enter start time for beginning of shift 2)
Code: XXX (enter up to three character code for shift 1)