Citizen JDVD3020B, Operating Manual

Page: 36 / 133

36
4
Timer recording
Press TV MENU . Press or to
select option.
Press or to select the date, then
press .
1
3
Press or to select one of the
program line, then press ENTER .
5
Press TV/VCR to select the TV/VCR mode.
Load a cassette tape with the erase prevention tab intact.
Press
DISPLAY/CALL to verify that the time and date are
correct (see pa ge 34 ).
Preparation:
•
•
•
Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8 pro-
grams within 1 month.
Set the start time , end time , channel
and tape speed as in step 4, then
press ENTER .
Example: Program a timer recording for the 23rd day, channel 125
(CABLE), 7:00 - 9:30 PM on timer program number 1 (Tape speed: SLP).
NOTES:
Press to move arrow backward for
correction.
To record from external source set the
channel to "L1" or "L2". "L1" or "L2" will
appear next to CH 125 (or 69).
6
To enter other programs, repeat step
3-5.
• To return to the normal screen,
press TV MENU 3 times.
7
Press TIMER REC . The TIMER REC indicator will light and
the VCR stands by for recording.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
If the TIMER REC indicator does not light in spite of the pressing
of
TIMER REC , the cassette may not have been loaded yet (see
page 29).
If the cassette is ejected in spite of the pressing of
TIMER REC ,
the erase prevention tab of the cassette may have been
removed (see page 29).
•
•
NOTES:
If the TIMER REC indicator blinks when
the timer recording ended, the TV pro-
gram has not been completely re-
corded because of an insufficient tape
supply. Press
TIMER REC to cancel
the timer program or press EJECT to
remove the cassette tape.
During timer recording standby mode,
the VCR operation cannot be used. To
use the VCR operation, press
TIMER
REC to deactivate the timer. After you
use the VCR, press TIMER REC again
to put the VCR into timer recording
standby mode.
If you press
TIMER REC during timer
recording, the recording operation will
be interrupted. If you press
TIMER
REC again within the programmed time,
the recording operation will start again.
After a power failure or disconnection
of the power plug, all programmed
recording settings and time display
will be lost upon resumption of power.
In this case, reset the clock (see pages
16-18) and reprogram any timer re-
cordings.
•
•
•
•
2
Press or to select “TIMER REC
SET”, then press .
•
•
/ / ENTER/MENU
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– : – – – : – – – – – –
– – – – – – : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
TIMER REC SET
DATE 23(THU)
START 8:30AM
END — — : — —
CH 012
SPEED
/ / / / MENU
SP
CH
TIMER REC SET
DATE
START
END
CH
125
SPEED
/ / / / ENTER/MENU
SLP
23(THU)
7 : 00PM
9 : 30PM
CH
2 3 T H
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
7 : 0 0PM 9 : 3 0PM 1 2 5
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
/ / ENTER/CANCEL/MENU
SLP
/ / / / MENU
TIMER REC SET
AUTO REPEAT
ON
TIMER REC SET
AUTO REPEAT
/ / / MENU
ON
CH
5K90201AE(34-37) 6/1/04, 14:19 36