Citizen JDVD3020B, Operating Manual

Page: 20 / 133

20
CALL
Press DISPLAY/CALL to display the
current informations on the screen.
Press
DISPLAY/CALL again to clear
the call display.
C/–
Press and release CH
+
or
–
. The
channel automatically stops at the
next channel set into memory.
For proper operation, before select-
ing channels, they should be set into
the memory. See pages 22 and 23
“Memorizing channels”.
SLEEP
To set the unit to turn off after a
preset amount of time, press
SLEEP
on the remote control. The clock will
count down 10 minutes for each
press of
SLEEP (120, 110, ...10, 0).
After the sleep time is programmed,
the display will appear briefly every
ten minutes to remind you that the
sleep timer is operating. To confirm
the sleep timer setting, press
SLEEP
and the remaining time will be
displayed for a few seconds. To
cancel the sleep timer, press
SLEEP
repeatedly until the display turns to 0.
SLEEP
120
• Channel number or VIDEO mode.
• Stereo or SAP (second audio
program) audio status.
• Audio output status.
MUTE
MUTE
Press MUTE to switch off the
sound. The unit’s sound will be
silenced and “MUTE” will briefly
appear on the screen. The
sound can be switched back on
by pressing this button again or
one of
VOL + or – .
NOTE:
To listen through the headphones,
insert the headphones (not supplied)
with a 1/8" mini plug into PHONES
jack on the front. The sound from the
TV speaker is muted.
CH 125 8 : 47
AM
MON
TV/VCR
00 : 00 : 00 SP
STEREO SAP
TV operation
(continued)
QUICK VIEW
This button allows you to go back to
the last channel selected by pressing
QUICK VIEW . Press QUICK VIEW
again to return to the last channel
you were watching.
5K90201AE(18-21) 6/1/04, 14:18 20