Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera Administration Manual Download Page 50

Page: 50 / 85

Configuring the Cisco WVC210 Internet Camera Software

Administration > Maintenance

WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide

Administration > Maintenance

The Administration > Maintenance window gives options for Restore Factory
Defaults, Restart, Firmware Upgrade, and Configuration.

Restore Factory Defaults

•

Restore Defaults—Restores the camera to the factory default settings.

Restart

•

Restart—Restarts the camera.

Firmware Upgrade

•

Upgrade Firmware—Updates the camera’s firmware; see

Chapter 6,

“Upgrading the Cisco WVC210 Internet Camera Firmware.”

Configuration

•

Save—Use this option to save a configuration file containing all of the
current camera management settings.

•

Browse—Locate a previously saved configuration file.

•

Upload—Upload a previously saved configuration file into the camera.

Summary of Contents for WVC210 - Small Business Wireless-G PTZ Internet Video Camera






















































































Search results

Summary of Contents for WVC210 - Small Business Wireless-G PTZ Internet Video Camera

Reviews:

Related manuals for WVC210 - Small Business Wireless-G PTZ Internet Video Camera

Brands by name

Popular brands

Cisco WVC210 - Small Business Wireless-G PTZ Internet Video Camera, Administration Manual

Search results

Summary of Contents for WVC210 - Small Business Wireless-G PTZ Internet Video Camera

Reviews:

Related manuals for WVC210 - Small Business Wireless-G PTZ Internet Video Camera

Brands by name

Popular brands