Cisco WRP400-G1 - Wireless Router User Manual Download Page 14

Page: 14 / 49

Chapter3

Advanced Configuration

Wreless-G Broadband Router wth 2 Phone Ports

TZO.com

Setup > DDNS > TZO

E-mal Address, TZO Key, and Doman Name

Enter the

settings of the account you set up with TZO.

Internet IP Address

The Router’s Internet IP address is

displayed here. Because it is dynamic, it will change.

Status

The status of the DDNS service connection is

displayed here.

Update

To manually trigger an update, click this button.

Click

Save Settngs

to apply your changes, or click

Cancel

Changes

to cancel your changes.

Setup > MAC Address Clone

A MAC address is a 12-digit code assigned to a unique

piece of hardware for identification. Some ISPs will require

you to register a MAC address in order to access the

Internet. If you do not wish to re-register the MAC address

with your ISP, you may assign the MAC address you have

currently registered with your ISP to the Router with the

MAC Address Clone feature.

Setup > MAC Address Clone

MAC Address Clone

Enabled/Dsabled

To have the MAC address cloned,

select

Enabled

MAC Address

Enter the MAC address registered with

your ISP here.

Clone Your PC’s MAC

Click this button to clone the MAC

address of the computer you are using.
Click

Save Settngs

to apply your changes, or click

Cancel

Changes

to cancel your changes.

Setup > Advanced Routing

This screen is used to set up the Router’s advanced

functions. Operating Mode allows you to select the

type(s) of advanced functions you use. Dynamic Routing

automatically adjusts how packets travel on your network.

Static Routing sets up a fixed route to another network

destination.

Setup > Advanced Routing

Advanced Routing

NAT

Enabled/Dsabled

If this Router is hosting your network’s

connection to the Internet, keep the default,

Enabled

. If

another router exists on your network, select

Dsabled

When the NAT setting is disabled, dynamic routing will be

enabled.

Dynamic Routing (RIP)

Enabled/Dsabled

This feature enables the Router to

automatically adjust to physical changes in the network’s

layout and exchange routing tables with the other

router(s). The Router determines the network packets’

route based on the fewest number of hops between

the source and the destination. When the NAT setting is

enabled, the Dynamic Routing feature is automatically

disabled. When the NAT setting is disabled, this feature

is available. Select

Enabled

to use the Dynamic Routing

feature.

Static Routing

A static route is a pre-determined pathway that network

information must travel to reach a specific host or network.

Summary of Contents for WRP400-G1 - Wireless Router


















































Search results

Summary of Contents for WRP400-G1 - Wireless Router

Reviews:

Related manuals for WRP400-G1 - Wireless Router

Brands by name

Popular brands

Cisco WRP400-G1 - Wireless Router, User Manual

Search results

Summary of Contents for WRP400-G1 - Wireless Router

Reviews:

Related manuals for WRP400-G1 - Wireless Router

Brands by name

Popular brands