The value is used during the Auto Configuration procedure during next boot-up.
•
Status Log
—This field displays reason of Auto Configuration completion or abort.
IPv6 Configuration
Use the
IPv6 Configuration
section to configure the IPv6 address by performing the following steps:
Step 1
Select
LAN > IPv6 Configuration
.
Step 2
Configure the following parameters:
•
IPv6 Connection Type
— Select one of the following options:
•
DHCPv6
— The IPv6 address is assigned by a DHCPv6 server.
•
Static IPv6
— Manually configure the IPv6 address. The IPv6 address should be in a form similar to
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (2001:DB8:CAD5:7D91).
•
IPv6 Administrative Mode
— Check
Enable
to enable IPv6 administrative mode.
•
IPv6 Auto Configuration Administrative Mode
— Check
Enable
to enable the IPv6 automatic address
configuration.
When the IPv6 automatic address configuration is enabled, the WAP device recognizes its IPv6 addresses and
gateway by processing the router advertisements received on the LAN port. The WAP device can have multiple
auto-configured IPv6 addresses.
•
Static IPv6 Address
— Enter the static IPv6 address. The WAP device can have a static IPv6 address even if
addresses have already been configured automatically.
•
Static IPv6 Address Prefix Length
— Enter the prefix length of the static address, which is an integer in the range
of 0 to 128. The default is 0.
•
Static IPv6 Address Status
— It can be one of the following status:
•
Operational
— The IP address has been verified as unique and is usable on the LAN interface.
•
Tentative
— The WAP device automatically initiates a duplicate address detection (DAD) process when a
static IP address is assigned. This IPv6 address is tentative as it is being verified on the network and cannot be
used to transmit or receive traffic.
•
Blank (no value)
— No IP address is assigned.
•
IPv6 Autoconfigured Global Addresses
— Lists the IPv6 addresses which have been automatically assigned to
the device.
•
IPv6 Link Local Address
— The IPv6 address used by the local physical link. The link local address is not
configurable and is assigned by using the IPv6 Neighbor Discovery process.
•
Default IPv6 Gateway
—The statically configured default IPv6 gateway.
•
IPv6 Domain Name Servers
— Select one of the following options:
•
Dynamic
— The DNS servers are recognized dynamically through the DHCPv6.
Cisco WAP581 Wireless-AC/N Dual Radio Access Point with 2.5GbE LAN Administration Guide
19
System Configuration
IPv6 Configuration
Summary of Contents for Wap581
Page 4: ......
