•
Remote Port
— The port number of any remote device communicating with this service.
•
Connection State
— The state of the service. For UDP, only connections in the Active or Established
states appear in the table. The TCP states are:
•
Listening
— The service is listening for connection requests.
•
Active
— A connection session is established and the packets are being transmitted and received.
•
Established
— A connection session is established between the WAP device and a server or client.
•
Time Wait
— The closing sequence has been initiated and the WAP device is waiting for a
system-defined timeout period (typically 60 seconds) before closing the connection.
You can modify or rearrange the order on the TCP/UDP Service Table. Click
Refresh
to refresh the screen
and show the most current information.
You can also enter parameters related to Service, Protocol and other details to filter the TCP/UDP Services
displayed.
Click
Back
to return to the
Getting Started
page.
Note
System Status
The System Status page displays the hardware model description, software version, and the various configuration
parameters such as:
•
PID VID
—The hardware model and version of the WAP device.
•
Serial Number
—The serial number of the WAP device.
•
Host Name
—The host name assigned to the WAP device.
•
MAC Address
—The MAC address of the WAP device.
•
IPv4 Address
—The IP address of the WAP device.
•
IPv6 Address
—The IPv6 address of the WAP device.
•
ETH0/PD Port
—Displays the status of Ethernet interface.
•
ETH1 Port
—Displays the status of ETH1 interface.
•
Radio 1 (5GHz)
—The 5GHz mode is enabled or disabled for the Radio 1 interface.
•
Radio 2 (2.4GHz)
—The 2.4GHz mode is enabled or disabled for the Radio 2 interface.
•
Power Source
—The system may be powered by a power adapter, or may be receiving power over
Ethernet (PoE) which includes two power supply modes of 802.3.af and 802.3at from a Power Sourcing
Equipment (PSE).
When power source is insufficient (802.3af), the WAP device retains the following configuration
information.
• The Radio1(5GHZ) is disabled.
Cisco WAP581 Wireless-AC/N Dual Radio Access Point with 2.5GbE LAN Administration Guide
7
Getting Started
System Status
Summary of Contents for Wap581
Page 4: ......
