Cisco VPN 3002 Hardware Client Manager Reference Manual Download Page 214

Page: 214 / 282

13-26

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 13 Monitoring

Monitoring | Statistics | Telnet

Attempted Sessions

The total number of attempts to establish Telnet sessions on the VPN 3002 since it was last booted or
reset.

Successful Sessions

The total number of Telnet sessions successfully established on the VPN 3002 since it was last booted
or reset.

Telnet Sessions

This table shows statistics for active Telnet sessions on the VPN 3002. Each active session is a row.

Client IP Address:Port

The IP address and TCP source port number of the remote Telnet client for this session.

Inbound Octets Total

The total number of Telnet octets (bytes) received by this session.

Inbound Octets Command

The number of octets (bytes) containing Telnet commands or options, received by this session.

Inbound Octets Discarded

The number of Telnet octets (bytes) received and dropped during input processing by this session.

Outbound Octets Total

The total number of Telnet octets (bytes) transmitted by this session.

Outbound Octets Dropped

The number of outbound Telnet octets dropped during output processing by this session.

Summary of Contents for VPN 3002 Hardware Client Manager



























































































































































































































































































Search results

Summary of Contents for VPN 3002 Hardware Client Manager

Reviews:

Related manuals for VPN 3002 Hardware Client Manager

Brands by name

Popular brands

Cisco VPN 3002 Hardware Client Manager, Reference Manual

Search results

Summary of Contents for VPN 3002 Hardware Client Manager

Reviews:

Related manuals for VPN 3002 Hardware Client Manager

Brands by name

Popular brands