manualshive.com logo in svg

Cisco VPN 3002 Hardware Client Manager, Reference Manual

The Cisco VPN 3002 Hardware Client Manager is a powerful product designed to enhance your remote network connectivity. Get started easily with the Quick Start Manual available for free download at manualshive.com, providing comprehensive instructions and insights for optimal usage of this innovative hardware client.

Share
Download
background image

 

13-21

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 13      Monitoring

Monitoring | Statistics | IPSec

Sent Packets Dropped

The cumulative total of packets dropped during send processing by all currently and previously active 
IPSec Phase-2 tunnels. This number should be zero; if not, check for a network problem, check the event 
log for an internal subsystem failure, or contact Cisco support.

Inbound Authentications

The cumulative total number of inbound individual packet authentications performed by all currently 
and previously active IPSec Phase-2 tunnels.

Failed Inbound Authentications

The cumulative total of inbound packet authentications that failed, by all currently and previously active 
IPSec Phase-2 tunnels. Failed authentications could indicate corrupted packets or a potential security 
attack (“man in the middle”).

Outbound Authentications

The cumulative total of outbound individual packet authentications performed by all currently and 
previously active IPSec Phase-2 tunnels.

Failed Outbound Authentications

The cumulative total of outbound packet authentications that failed, by all currently and previously 
active IPSec Phase-2 tunnels. This number should be zero or very small; if not, check the event log for 
an internal IPSec subsystem problem.

Decryptions

The cumulative total of inbound decryptions performed by all currently and previously active IPSec 
Phase-2 tunnels.

Failed Decryptions

The cumulative total of inbound decryptions that failed, by all currently and previously active IPSec 
Phase-2 tunnels. This number should be zero or very small; if not, check for misconfiguration.

Encryptions

The cumulative total of outbound encryptions performed by all currently and previously active IPSec 
Phase-2 tunnels.

Failed Encryptions

The cumulative total of outbound encryptions that failed, by all currently and previously active IPSec 
Phase-2 tunnels. This number should be zero or very small; if not, check the event log for an internal 
IPSec subsystem problem.

Summary of Contents for VPN 3002 Hardware Client Manager



























































































































































































































































































Reviews:

No comments

Related manuals for VPN 3002 Hardware Client Manager

National Instruments NI-9252 Calibration Procedure preview
NI-9252
Brand: National Instruments Pages: 9
NEC P401-TMX4D User Manual preview
P401-TMX4D
Brand: NEC Pages: 2
N.A.T. NAT-MCH Technical Reference Manual preview
NAT-MCH
Brand: N.A.T. Pages: 32
NA DigiNet 416 User Manual preview
DigiNet 416
Brand: NA Pages: 22
Watchguard XTM 850 Hardware Manual preview
XTM 850
Brand: Watchguard Pages: 30
Cytron Technologies SHIELD-2AMOTOR User Manual preview
SHIELD-2AMOTOR
Brand: Cytron Technologies Pages: 13
Supersonic Franky Instruction Manual preview
Franky
Brand: Supersonic Pages: 46
BHU NETWORKS BXM2 User Manual preview
BXM2
Brand: BHU NETWORKS Pages: 75
Renesas REJ06B0734-0100 Application Note preview
REJ06B0734-0100
Brand: Renesas Pages: 19
FOR-A MFR-1616 Quick Start Manual preview
MFR-1616
Brand: FOR-A Pages: 2
JLCooper Electronics GangWay32 User Manual preview
GangWay32
Brand: JLCooper Electronics Pages: 12
Ubiquiti UniFi AP PRO Quick Start Manual preview
UniFi AP PRO
Brand: Ubiquiti Pages: 20
Altera Cyclone IV GX Reference Manual preview
Cyclone IV GX
Brand: Altera Pages: 40
Milesight Pro UR32 Quick Start Manual preview
Pro UR32
Brand: Milesight Pages: 15
TRENDnet TE100S8P - Fast Ethernet Switch (Spanish) Quick Installation Manual preview
TE100S8P - Fast Ethernet Switch
Brand: TRENDnet Pages: 11
ADTRAN Express L128FP User Manual preview
Express L128FP
Brand: ADTRAN Pages: 161
Antec KÜHLER H2O 920 Software Manual preview
KÜHLER H2O 920
Brand: Antec Pages: 6
Knowles IA611 Xplained Pro User Manual preview
IA611 Xplained Pro
Brand: Knowles Pages: 14

Brands by name

Popular brands

Load more brands