7
Table 3
lists the labels and descriptions for the interfaces on a Cisco Catalyst Express 520, along with
the values for these interfaces in the software configuration on the UC 520.
Table 4
lists the default values for IP addresses in the preconfigured software configuration for the
UC 520.
.
Software Components
The UC 520 is shipped with a factory-installed software configuration for a basic IP telephony system.
This system enables phone users to make and receive calls using the preconfigured numbers on their
IP phones within minutes after connecting the UC 520 to the Ethernet and their IP phones to the
platform. For informations, see the
“Default Software Configuration” section on page 42
.
Table 3
Cisco Catalyst Express 520 Switch: Interfaces
Description
Label
Value in Software
Configuration
Ethernet 10/100/1000 dual purpose port
1000BASE-X
GigabitEthernet1
Small form-factor pluggable (SFP) module slot
for uplink or server connectivity.
1000BASE-FX
Fast Ethernet 10/100 Power over Ethernet
(PoE) ports
Left-to-right,
10BASE-T /
100BASE-TX and
1X-8X or 1X-24X
Left-to-right,
FastEthernet1 to 8
FastEthernet1 to 24
Table 4
IP Addresses and Subnet Mask
Description
IP Address in Software Configuration
Cisco Unified Communications Manager Express
(Cisco Unified CME)
10.1.1.1
255.255.255.0
All IP phones to be connected
10.1.1.11 to 10.1.1.254
255.255.255.0
All data devices to be connected
192.168.10.11 to 192.168.10.254
255.255.255.0
Network on expansion port of the UC 520
192.168.10.1
255.255.255.0
