22
Figure 6
Wall-Mount Holes on the Bottom of the UC 520
Step 2
Align the mounting-screw holes with a wall stud, or use wall anchors.
a.
For attaching to a wall stud, use two #10 wood screws (round- or pan-head) with #10
washers, or two #10 washer-head screws. The screws must be long enough to penetrate at
least 3/4 inch (20 mm) into supporting wood or into a metal wall stud.
b.
For hollow-wall mounting, wall must be at least 1/2 inch (12.7 mm) thick. Use two wall
anchors with
washers.
Wall anchors and washers must be a size suitable for the wall to which
they are mounted.
Step 3
Position the chassis on the wall.
a.
Orient the front and back of the chassis vertically.
b.
The unit must be oriented with the front panel (TNV connection side) facing up and the
connection to the power cord facing down.
1
Front panel
2
Mounting-screw holes
242821
1
2
2
8.318 in. (21.127 cm)
