25
Step 3
Position the power supply in the wall-mount bracket. (This step applies only to the 8- and
16-user models.)
a.
Orient the front and back of the power supply vertically.
b.
Position the end nearest the power cable at the top.
Step 4
Assemble the brackets for rack-mounting the power supply as shown in
Figure 10
, using the
four screws provided. Use a number 2 Phillips screwdriver to install the bracket screws.
Figure 10
Assembling Rack-Mount Kit for the Power Supply
Installing the UC 520 and Power Supply in a Rack
To mount the chassis and power supply in a 19-inch rack, follow these steps:
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take
special precautions to ensure that the system remains stable. The following guidelines
are provided to ensure your safety:
-- This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
-- When mounting this unit in a partially filled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.
-- If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.
Statement 1006
Caution
Chassis installation must allow unrestricted airflow for chassis cooling.
242824
