31
Step 2
Launch Configuration Assistant. For information, see the Getting Started with Cisco
Configuration Assistant document at
http://www.cisco.com/go/configassist
or on the
CD-ROM that shipped with your product.
Step 3
Using an RJ-45-to-RJ-45 Ethernet cable, connect the Ethernet port of the PC on which the
Cisco Configuration Assistant is installed to a PoE port on the front panel of the UC 520.
Step 4
Use the Configuration Assistant to perform the following tasks. For more information, see
online help.
a.
Connect to a New Community.
b.
Accept the default values to create the initial configuration.
Note
If you are installing a single-site key system configuration, change the Voice System
Type setting from PBX to Key System Configuration.
c.
Save the configuration.
Step 5
Confirm that the UC 520 appears in the Topology View.
What to Do Next
These tasks can be performed in any order:
•
To install a Cisco Catalyst Express 520 switch, see the
“Installing a Cisco Catalyst Express 520
for a UC 520” section on page 32
.
•
To connect the UC 520 to a WAN, PSTN, or ISDN or to connect devices such as wireless access
options, phones, and PCs, see the
“Connecting the Interfaces and Devices” section on page 39
.
•
To add and configure locales and languages other than US English on the UC 520 and for voice
mail prompts, see the
“Configuring Localization” section on page 46
.
•
To modify the software configuration to personalize the UC 520 with site-specific values for basic
and advanced telephony features, see the
“Modifying the Software Configuration” section on
page 42
