6-27
Cisco RF Gateway 10 Hardware Installation Guide
OL-16264-04
Chapter 6 Cabling the Cisco RFGW-10 UEQAM
Cabling the Supervisor Engine
Fiber-optic SFP modules also use MT-RJ connectors, as shown in
Figure 6-21
MT-RJ Fiber-Optic SFP Module
1000BASE-T SFP Modules
Copper 1000BASE-T SFP modules use RJ-45 connectors, as shown in
Figure 6-22
1000BASE-T Copper SFP Module
1000BASE-T copper SFP modules used with the Cisco RFGW-10 UEQAM Supervisor Engine V-10GE
operate only in 1000BASE-T mode, or at 1000 Mbps. Copper 1000BASE-T SFP modules use standard
four twisted-pair, Category 5 cable at lengths up to 328.08 feet (100 meters).
CWDM SFP Modules
You can connect the CWDM SFPs to CWDM passive optical system optical add/drop multiplexer
(OADM) or multiplexer/demultiplexer plug-in modules using single-mode fiber-optic cables with
standard SC connectors. Figure 1-23 shows a CWDM SFP with the optical port dust plug removed.
CWDM SFP Module (Yellow-Coded CWDM-SFP-1550= Shown)
CWDM SFPs come in eight wavelengths that range from 1470 nm to 1610 nm. Color markings on the
devices identify the wavelength to which the Gigabit Ethernet channel is mapped. Table 1-9 lists the
CWDM SFPs with their wavelengths and color codes.
Table 6-8
SFP Wavelengths and Color Coding
87946
87922
SFP Product Numbers
Wavelength
Color Identifier
CWDM-SFP-1470=
Longwave 1470 nm laser, single mode
Gray
CWDM-SFP-1490=
Longwave 1490 nm laser, single mode
Violet
CWDM-SFP-1510=
Longwave 1510 nm laser, single mode
Blue
CWDM-SFP-1530=
Longwave 1530 nm laser, single mode
Green
CWDM-SFP-1550=
Longwave 1550 nm laser, single mode
Yellow
CWDM-SFP-1570=
Longwave 1570 nm laser, single mode
Orange
