Cisco Nexus 5500 Series Command Reference Manual Download Page 343

Page: 343 / 460

1337

Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference

OL-27880-02

Chapter Show Commands

show port-channel compatibility-parameters

To display the parameters that must be the same among the member ports in order to join an
EtherChannel interface, use the

show port-channel compatibility-parameters

command.

show port-channel compatibility-parameters

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

EXEC mode

Command History

Examples

This example shows how to display the EtherChannel interface parameters:

switch#

show port-channel compatibility-parameters

* port mode

Members must have the same port mode configured.

* port mode

Members must have the same port mode configured, either E,F or AUTO. If

they are configured in AUTO port mode, they have to negotiate E or F mode

when they come up. If a member negotiates a different mode, it will be

suspended.

* speed

Members must have the same speed configured. If they are configured in AUTO

speed, they have to negotiate the same speed when they come up. If a member

negotiates a different speed, it will be suspended.

* MTU

Members have to have the same MTU configured. This only applies to ethernet

port-channel.

* shut lan

Members have to have the same shut lan configured. This only applies to

ethernet port-channel.

* MEDIUM

Members have to have the same medium type configured. This only applies to

ethernet port-channel.

Release

Modification

5.2(1)N1(1)

This command was introduced.

Summary of Contents for Nexus 5500 Series













































































































































































































































































































































































































































































Search results

Summary of Contents for Nexus 5500 Series

Reviews:

Related manuals for Nexus 5500 Series

Brands by name

Popular brands

Cisco Nexus 5500 Series, Command Reference Manual

Search results

Summary of Contents for Nexus 5500 Series

Reviews:

Related manuals for Nexus 5500 Series

Brands by name

Popular brands