Cisco Nexus 5500 Series Command Reference Manual Download Page 134

Page: 134 / 460

1128

Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference

OL-27880-02

Chapter P Commands

pinning

To configure pinning options for an interface, use the

pinning

command. To revert to the default settings,

use the

form of this command.

pinning

{

control-vlan

packet-vlan

}

sub_group_ID

no pinning

{

control-vlan

packet-vlan

}

Syntax Description

Command Default

None

Command Modes

Interface configuration mode

Command History

Usage Guidelines

This command does not require a license.

Examples

This example shows how to configure packet VLAN pinning for an interface:

switch#

configure terminal

switch(config)#

interface ethernet 1/5

switch(config-if)#

pinning packet-vlan 5

switch(config-if)#

Related Commands

control-vlan

Configures pinning for control VLANs.

packet-vlan

Configures pinning for packet VLANs.

sub_group_ID

Sub-group ID. The range is from 0 to 31.

Release

Modification

5.2(1)N1(1)

This command was introduced.

Command

Description

show running-config

Displays the running system configuration information.

Summary of Contents for Nexus 5500 Series













































































































































































































































































































































































































































































Search results

Summary of Contents for Nexus 5500 Series

Reviews:

Related manuals for Nexus 5500 Series

Brands by name

Popular brands

Cisco Nexus 5500 Series, Command Reference Manual

Search results

Summary of Contents for Nexus 5500 Series

Reviews:

Related manuals for Nexus 5500 Series

Brands by name

Popular brands