1312
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show interface virtual
show interface virtual
To display the status of all virtual interfaces, use the
show interface virtual
command.
show interface virtual
{{
status
|
summary
} [
adapter-fex
|
bound
interface
ethernet
slot/[QSFP-module/]port
|
vm-fex
]}
Syntax Description
Command Default
None
Command Modes
EXEC mode
Command History
Usage Guidelines
Before you use this command, make sure that you enable Cisco Virtual Machine Fabric Extender
(VM-FEX) on the switch by using the
feature vmfex
command.
Examples
This example shows how to display brief information about the counters configured on a specified virtual
Ethernet interface:
switch#
show interface virtual status
Interface VIF-index Bound If Chan Vlan Status Mode Vntag
-------------------------------------------------------------------------
Total 1 Veth interfaces
switch#
status
Displays the status of all virtual Ethernet interfaces (vEth) and floating
virtual interfaces.
summary
Displays the summary information about virtual Ethernet interfaces.
adapter-fex
(Optional) Displays information about fixed virtual ethernet interfaces.
bound interface
(Optional) Displays information about virtual interfaces on a bound
interface.
ethernet
slot/[QSFP-module/]port
(Optional) Displays information about a specific ethernet interface.The
slot
number is from 1 to 255. The
QSFP-module
number is from 1 to
4. The
port
number is from 1 to 128.
Note
The
QSFP-module
number applies only to the QSFP+ Generic
Expansion Module (GEM).
vm-fex
(Optional) Displays information about all floating virtual interfaces.
Release
Modification
6.0(2)N1(1)
Support for the QSFP+ GEM was added.
5.2(1)N1(1)
This command was introduced.
