Setting up End-User Access
Creating a User Profile
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
4
5
STEP 4
Select the group you want to assign as the user’s primary group from the
Primary
Group
field. If there are no groups configured, the only available choice is the
default group "nasusers". This field is required.
NOTE
Although you can assign the user to multiple groups (through the
Add Group
or
Edit
Group
page), the primary group is the group against which quota charges for the
user’s storage usage are made and is the group that defines the group ownership
for all files created by the user. The primary group applies to users set up locally on
the NSS. A domain user’s primary group is set up from the domain and is not
derived from the Primary Group field in the NSS user profile.
STEP 5
Assign a password by entering any valid (ASCII table) characters in the
Password
field. The password is required.
STEP 6
To verify the password, re-enter it in the
Confirm Password
field.
NOTE
All password changes to end-user accounts set up through the NSS configuration
pages must be made by the administrator.
STEP 7
To record the user’s full name, enter it in the
Real Name
field. This field is optional.
Note that you cannot enter the "/" character in this field.
STEP 8
To record the user’s email address, enter it in the
Email Address
field. This field is
optional.
STEP 9
Click
OK
to create the user and exit the
New User
page. Click
Apply
to create the
user and then add another new user.
