Adding the NSS to your Network
Viewing the Network IP Settings.
Cisco Small Business NSS3000 Series Network Storage System Administration Guide
16
3
Viewing the Network IP Settings.
The
Network Device IP
page displays information about the physical and virtual
interfaces currently configured on the NSS.
NOTE
If you hotplug the Ethernet link after the initial installation of the NSS, make sure that
you wait 15 seconds between the time you unplug the cable and then plug it back
in. The NSS displays the correct new settings within 10 seconds.
To display the
Network Device IP
page, from the
Manager Menu
, click
Network
IP
. The
Network Device Settings
table displays the following:
•
Link
: The number of the physical link attached to the NSS. It appears as 1.
•
VLAN
: The ID assigned to the virtual interface. For physical interfaces, this
column is blank.
•
Assign
via
: The method used to assign an IP configuration to the physical or
virtual interface. Options include:
-
DHCP
: The IP configuration was assigned by a DHCP server. Or, if the
interface was configured to use DHCP for IP configuration but no DHCP
server was found, the IP address was assigned by the AutoIP protocol.
