Twelve pluggable front panel connections allow a single-chassis system to migrate to a back-to-back or
multi-chassis configuration.
See the
Verifying the Installation of a Fabric Card, on page 67
for details about LEDs, troubleshooting, and
to see the front panel of the FC card.
Physical Characteristics
•
Height
—
11.05 in. (280.6 mm)
•
Width
—
1.55 in. (39.4 mm)
•
Depth
—
14.25 in. (362 mm)
•
Weight
—
of the 200G FC is 7.54 lb (3.42 kg); of the 400G FC is 8.92 lb (4.05 kg)
Installing a Fabric Card
This section contains the following procedures:
Installing a Fabric Card
Prerequisites
Before performing this task, open the front door, if installed.
Required Tools and Equipment
•
ESD-preventive wrist strap
•
Number-2 Phillips screwdriver or number-2 common (flat-head) screwdriver
•
FC (Cisco PID NCS4016-FC-M or Cisco PID NCS4016-FC2-M)
Steps
Hardware Installation Guide for Cisco NCS 4000 Series
63
Installing Route Processor Cards, Fabric Cards, and Line Cards
Installing a Fabric Card
