C H A P T E R
6
Removing and Replacing Chassis Components
This chapter provides instructions on how to remove and replace components from the Cisco NCS 4016
chassis.
•
Removing and Replacing Chassis Components, page 97
Removing and Replacing Chassis Components
Removing a Line Card
This section describes how to remove a line card from the Cisco NCS 4016 chassis.
Class 1 Laser Product.
Statement 113
Warning
Because invisible radiation may be emitted from the aperture of the port when no fiber cable is
connected, avoid exposure to radiation and do not stare into open apertures.
Statement 125
Warning
For diverging beams, viewing the laser output with certain optical instruments within a distance of
100 mm may pose an eye hazard. For collimated beams, viewing the laser output with certain optical
instruments designed for use at a distance may pose an eye hazard.
Statement 282
Warning
Prerequisites
Before performing this task, open the front door, if installed.
Hardware Installation Guide for Cisco NCS 4000 Series
97
