Installing the DC Power Front Connection Adapter
If you have limited access to the back of the chassis, or limited space behind the chassis, you can use the DC
Power Front Connection Adapter. This DC adapter moves the DC power connections from the back of the
chassis to the front of the chassis. This may be desirable in ETSI rack installations.
Figure 94: DC Power Front Connection Adapter
Prerequisites
•
If the rear to front power adapter is going to be used, the sub assembly needs to be attached first to the
chassis and then both units installed in a rack or cabinet.
•
The Cisco NCS 4009 chassis should be completely removed from the packaging and installed in the
rack or cabinet.
Required Tools and Equipment
•
6-inch, number-1 Phillips screwdriver
•
One DC Power Front Connection Adapter (NCS4K-DC-FA, includes brackets)
•
3/8 Ratchet Wrench, 7/16 Socket, and a Torque Wrench
Steps
Hardware Installation Guide for Cisco NCS 4000 Series
177
Installing Power Components
Installing the DC Power Front Connection Adapter
